Kestrel 4500NV Applied Ballistics Meter Manual de usuario descargar pdf (Pagina 15)

• In order to accept the Calibrated DSF value, press

and select “Yes” by pressing .

• Press to exit to return to the Gun

Information screen. The Kestrel will ask if you want to

accept the DSF Calibration.

• To view the DSF table, scroll to "View DSF" in the Gun

menu and press to see what DSFs have been

stored. You may repeat this step for up to six DSF

values. Please remember that entering DSF values at

ranges closer than previously entered will invalidate

DSF values at those longer ranges.

Target screen:

You can customize up to ve targets for location,

distance, direction, declination and wind.

• From the Main AB screen, use or to

highlight “Tgt” and press to

enter the Target screen.

• Use and to highlight a

parameter.

• Use and to adjust values for

each parameter.

• Press to enter the

highlighted parameter’s screen.

Mach DSF

1 0.000 1.000

2 0.000 1.000

3 0.000 1.000

4 0.000 1.000

The rst row of the DSF table will be

prepopulated with the mach value at which

muzzle velocity was calibrated and a drop

scale factor of 1.00. If ballistics calibration

was not completed, a default value of 1.0 will

be entered for you. However, calibrating your

muzzle velocity after establishing DSF table

will update the rst row of your DSF table accordingly without clearing

the rest of your DSF table entries.

TARGET SCREEN

Here you are able to adjust the parameter values as well

as the unit of measure. (For example, yards to meters.)

Multiple Targets

• You may create up to ve targets (A-E) by

highlighting “Target” and pressing or to move

on to the next target. After changing targets, the

parameters can be changed by repeating the steps

outlined above.

Active

• The “Active” status of Target A defaults to “Yes”

because the Kestrel must have at least one active

target at all times.

• To make a target active, on the Target screen use

or to highlight “Active” and use or

to change to “Yes.” To make a target inactive, use

or to change to “No.”

• Setting a target’s “Active” status to “Yes” allows you

to view the ring solution for that target on the Main

AB screen.

• If multiple targets are active, you can use or to

scroll between all active targets (and their respective

ring solutions) on the Main AB screen.

TARGET

Active

DoF

Ide

Yes

998m

000º

0˚

Wind

100 m

000°

3oc

49.24

1.36/3.03

Wind

549 m

000°

3oc

16.58

0.68/1.46

HOLD

Windage

Elevation

Target A is current

active target.

Target B is current

active target.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Comentarios a estos manuales

Sin comentarios

Kestrel 4500NV Applied Ballistics Meter Manual de usuario Pagina 15

Comentarios a estos manuales